University of California-Santa Barbara's trusted spray foam contractor for commercial roofing, residential insulation, and emergency roof repair across California.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in University of California-Santa Barbara.
Silicone coatings provide the longest service life of any roof coating product. Our crews apply them over metal, TPO, EPDM, built-up, and spray foam surfaces — sealing the entire roof in a seamless, reflective, waterproof membrane.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
Commercial roofs deteriorate from the surface down. If your structure and deck are sound, restoration with spray foam and silicone coating is the economically superior choice. We handle buildings from 5,000 to 500,000 square feet.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
University of California-Santa Barbara, CA experiences the kind of temperature swings that punish conventional roofing and insulation. Lapolla Industries installs spray polyurethane foam systems engineered to perform in exactly these conditions — continuous insulation with no thermal bridging, no seams, and no weak points where California weather can exploit gaps in your building envelope.
For University of California-Santa Barbara businesses watching their utility bills climb, a spray foam roof restoration can reduce cooling costs by 20 to 40 percent while extending roof life by 20 or more years. For homeowners, attic and crawl space insulation with closed-cell SPF eliminates hot spots, cold drafts, and the energy waste that comes with them. Call (866) 605-0362 for a free energy assessment.
Here is what sets Lapolla Industries apart from other contractors in University of California-Santa Barbara.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
Have questions about spray foam in University of California-Santa Barbara? We have answers.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in University of California-Santa Barbara we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in University of California-Santa Barbara. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any University of California-Santa Barbara roof with drainage challenges or heavy weather exposure.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For University of California-Santa Barbara homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Spray foam is one of the best solutions for flat and low-slope roofs in University of California-Santa Barbara. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
A properly installed SPF roof in University of California-Santa Barbara can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Spray foam insulation costs in University of California-Santa Barbara typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most University of California-Santa Barbara homeowners see a full return on investment through energy savings within 3 to 5 years.
Real reviews from property owners we have served across the country.
"Lapolla Industries coated our standing seam metal roof with a reflective system that stopped the leaks at the panel overlaps. The building stays significantly cooler in summer and the coating has held up perfectly through two winters."
"Got a comprehensive inspection done on our warehouse roof. They found three areas of trapped moisture that were invisible from the surface. The early detection saved us from much more expensive structural repairs down the road."
"Called about cracks forming in our spray foam roof coating. Lapolla Industries came out, assessed the damage, and recoated the affected areas. The repair blended seamlessly with the existing surface. Fair pricing too."
Looking for a spray foam contractor near University of California-Santa Barbara? We serve these surrounding areas too.